Golden Peakock - Lamp Holder Manufacturers

  Yes, you read it right! All cable grips are not manufactured equally and as a leading cable gripper manufacturer we can assure you that this statement is absolutely true.  Cable grippers are available in a variety of choices and options. However, most contractors get used to working with one type. So, as manufacturers we would like to throw light on a few more options and discuss their pros individually.  One of the most commonly used cable grippers would be one with no ‘grip’ at all. It is a simplified version of the half-hitch method which is attached to the last couple of feet of the cable. This should be workable provided the pull is not too much or too difficult. However, this half-hitching method can be a problem if the cable head happens to bow under a large amount of tension causing a drag to the head of the cable. In this case, all the force gets accumulated on the last hitch which can actually lead to a cable to snap at the last hitch. This problem arises par...

  A cable gripper is used to grasp or enclose parts of transfer, insertion, or assembly. They are primarily used in environments where the human presence can be hazardous. Therefore, they must be designed and selected keeping in mind several factors that will ensure safety, reliability, and health concerns.  The 1/16” cable gripper is most commonly used for various applications. However, choosing and sizing the right gripper to meet your application purpose is extremely important and these are some of the considerations that must be factored in.  If the shape of the part consists of two opposing flats, then a 2-jaw gripper must be used. If it is cylindrical, a 3- jaw gripper is required. However, tooling can be designed to accommodate cylindrical parts with a 2-jaw gripper.  The accessibility and part consistency must also be considered. While angular grippers are low in cost, they require additional tooling clearance that will grip at varying points as part width v...